Site icon Eco Driving USA

How to Install a Fifth Wheel Hitch on a Short Bed Truck Cover

How to Install a Fifth Wheel Hitch on a Short Bed Truck Cover

How to Install a Fifth Wheel Hitch on a Short Bed Truck Cover

Are you having a hard time maneuvering your rugged tools and equipment?

In addition, are you still figuring out how to install your fifth wheel hitch to your short bed truck without wasting your reserved time and resources?

If your answer is a yes, then you need to look at the steps again.

You may also think that installing a fifth wheel hitch to a short bed truck needs an ample amount of your required resources, time, and effort.  Well, if you are thinking that way, then this article will prove to you that it is not valid.

This is mainly all about the steps and some other tips that you need to know that will help you save in your installation. Make sure to read this until the end so that your remaining queries and confusions will be off!

Slider Fifth Wheel Hitch

Slider fifth wheel hitch is a creative solution for towing problems that you may encounter when in a trip. However, you must know that slider fifth wheel hitch are what is suitable to be attached to short bed trucks.

It easily slides to adjust to every truck turn. It can even turn up to 90 degrees before turning back to its original place in every maneuver. Slider fifth wheel are the answer to the right weight distribution and security of the hitch being attached to the truck.

Fifth Wheel Hitch on Bed Truck Maintenance Installation

What are the tools needed?

It would help if you took note that fifth wheel hitches and short bed trucks usually come in a variety. With the differences, you can always choose the kind and type of tools that you will use.

However, put into mind that the designs are of the same purpose. Fifth wheel hitches give you the ease to affix the frame of your truck that you place above the axle and trailer pin.

To know more, let us begin with the steps.

How to install a fifth wheel hitch on a short bed truck?

Do not think of this seriously but at least find this thing as a recreation as well! Sweat may pop out of your pores but well if you enjoy and are attentive enough, then your sweat will never be a waste.

Step 1: Settle what you need

Did you ever experience that your wheel goes flat because you forgot to check on your wheels before you start your road trip? That is for sure, a pain in the head. That also happened because of the too much thrill that you felt.

Therefore, before you put your hands on the tools and the hitch prepare the tools and all of the essentials that you need. Please do not jump to a reason that you forgot a thing for it would be such a waste of time.

Step 2: Do the measurement 

Step 3: What to do with your mounting brackets

Step 4: What to do with your mounting rail

Step 5: Installation of the rail

Installing a Fifth Wheel Hitch on Bed Truck Without a Liner

Do you know that it is best to install a hitch without a liner? The rails that is responsible in supporting the hitch should not be attached with a liner. Bed liners are no longer necessary especially when the brackets were installed the right way.

You may find this interesting: How to remove a truck bed by yourself?

Installing a Fifth Wheel Hitch on Bed Truck With a Liner

This process of installing is only applicable if your liner is a spray-in kind. You can attach the fifth wheel hitch on top of it right away. You can also use the drop-in kind of liner only if you cut down so that the bed rails would be able to have a direct contact with the truck bed.

Without the trimming, even though you are confident that the connection is strong, eventually, the plastic liner will break down and disintegrate. It will cause to loosen the hitch and would impose a risk.

Fifth Wheel Hitch on Bed Truck Maintenance

Just like taking care of any car, the fifth wheel hitch is pretty much the same. The most important care that I already call a routine is the daily checking of the hitch parts.

Make sure to keep designated parts lubricated and ensure that nothing is missing. I have made it a habit to eye on anything that I see loose and tighten it all down. There should be a scheduled maintenance for at least once every six months to ensure it will work accordingly.

You see, all may be too technical. However, if travel and adventure is your passion, you will get the hang of it in no time. Maintenance and installation will go hand-in-hand and it will be like a part of your day.

Hope this article can help you in installing a fifth wheel hitch on a best tonneau cover. If you find shared information is helpful, do not mind to share with your friends.

Exit mobile version