Lifted trucks and SUVs are all the rage at the moment.
They’re considerably higher than a conventional vehicle, though, and when it’s time for a quick repair or tire change, you need a jack lift with a high enough lift range. Even more so, they’re more substantial than cars – and your jack needs to be capable of safely holding the extra weight.
But what’s the best floor jack for lifted trucks?
To help you make this important choice, I researched and compared the market’s leading options – and narrowed it down to the following jacks for your lifted truck.
The 10 Best Floor Jacks for Lifted Trucks in 2024
1. Hi-Lift X-Treme Jack 60″
The Hi-Lift X-Treme Jack 60″ is unique for a number of reasons, one of which being its length. Clearly, at 60 inches, its reach is longer than that of most jacks on the market, making it ideal for retrieving vehicles from deep ruts or ditches.
I put the jack through its paces with some of the heaviest cars and SUVs in order to verify its stated capacity of 7,000 pounds.
I also found the Hi-Lift X-Treme Jack 60″ high lift and several safety features to be quite impressive.
The jack’s handle and socket are separate pieces for your convenience, particularly while working in wet conditions or when wearing gloves. A complete safety bar that locks into place on the jack prevents it from accidentally slipping or dropping.
I was relieved to learn that the Hi-Lift X-Treme Jack 60″ is built to last, in addition to its remarkable capabilities.
Its sturdy steel construction and durable powder coating ensure it won’t rust or corrode. The jack is backed by a limited 1-year warranty, so you can rest certain that it can handle everything you throw at it.
The Hi-Lift X-Treme Jack 60″ is, on the other hand, a terrific tool for off-road enthusiasts and adventurers. However, it does need some skill and understanding to use safely.
The instructions for utilizing the jack are included in the packaging, so you may study them and get some experience before putting them to use in the field.
The Hi-Lift X-Treme Jack 60″ is, in general, an excellent item that delivers on its claims. It’s a sturdy jack that can bear up under the heaviest loads and toughest conditions.
| Pros | Cons |
|
Sturdy steel construction |
Only a single year – limited warranty |
|
Durable powder coating |
|
|
Separate handle and socket pieces |
|
|
A reliable safety bar |
The 60-inch Hi-Lift X-Treme Jack is the ideal tool to help you overcome every challenge you encounter when driving off-road.
2. Hi-Lift Patriot Edition Jack 60″
The standard Hi-Lift Jack has been updated into a limited-edition 60″ model called the Hi-Lift Patriot Edition Jack.
This jack was made with the off-road enthusiast in mind, one who values a durable and dependable tool capable of withstanding the rigors of even the roughest terrain.
The 60″ Patriot Edition Jack is more than simply a tool; it’s also a symbol of patriotism and national pride. If you’re in the market for a high-quality jack that will get you through the roughest of off-road excursions, look no further.
The Hi-Lift 60″ Patriot Edition Jack stands out due to its one-of-a-kind look. The jack is decorated with a powder-coated American flag in red, white, and blue. This style will get you noticed and admired everywhere you go.
The 60″ Patriot Edition Jack, however, is more than meets the eye. With a 7,000-pound capacity and a long reach of 60 inches, it is constructed to the same high standards as the original Hi-Lift Jack.
For difficult off-road operations like pulling big cars out of ruts or ditches, this is the perfect equipment.
The Patriot Edition 60″ Jack is built with both performance and security in mind.
It’s simple to use even when your hands are wet or dirty thanks to its two-piece handle and socket. The jack’s special safety bar locks into place to prevent it from falling or slipping out of your hands.
The 60″ Patriot Edition Jack is built to last, which is another fantastic feature. The powder coating on its steel construction makes it resistant to rust and corrosion.
You can be certain that the jack will survive for at least a year, thanks to the included 1-year limited warranty.
Although the Patriot Edition 60″ Jack is a fantastic piece of equipment for off-road fans, it should be used with caution.
Before using the jack in the field, you should familiarize yourself with its operation by reading the instructions and trying it out first in a controlled setting.
The Hi-Lift Patriot Edition 60″ Jack, in general, is a high-quality item that lives up to its claims. It’s a sturdy jack that won’t let you down, even on the roughest ground or with the heaviest of loads.
| Pros | Cons |
|
Elegant blue powder coat finish |
Without the manual, it’s quite challenging to assemble it. |
|
7000 lbs tested capacity |
|
|
60-inch all-steel construction |
|
|
No more slipping and falling out of your hands |
This design will express your patriotism and make a statement everywhere you go. The Hi-Lift Patriot Edition 60″ Jack is a high-quality option for anybody searching for a jack that will help them conquer any off-road obstacle.
3. SMITTYBILT Trail Jack 54″
A SMITTYBILT Trail Jack 54″ is a reliable and long-lasting tool made for people who like to go off-roading and need a jack that can handle rough terrain.
Its jack can support up to 4660 pounds of weight, making it ideal for extracting large trucks, SUVs, and other big vehicles from difficult off-road situations.
The SMITTYBILT Trail Jack 54″ main feature and the largest selling point is its size. The length of this jack is just 54 inches, making it more manageable than longer off-road jacks.
People that have limited pickup truck bed space or car trunk space should rejoice in the fact that this jack stand doesn’t require a large space to store.
Compared to others in today’s roundup, the SMITTYBILT 54″ may seem tiny, but it packs a big punch – it’s a robust device that can conquer any obstacle encountered on the trail.
The powder coating on its steel construction makes it highly resistant to rust and corrosion. The jack has a one-year guarantee, so you know it can handle the rigors of camping trips.
The SMITTYBILT Trail Jack 54″ also has another outstanding quality- it’s known for its adaptability. I found that this jack can be used for more than just lifting; it can also be winched, clamped, and pulled.
As a result, it serves as a one-stop solution for a wide variety of off-road problems.
Manufacturers behind SMITTYBILT’s 54-footer Trail Jack also prioritized security throughout development. The sturdy construction and wide base make it ideal for lifting huge automobiles.
The jack’s built-in safety valve protects it from being overloaded, reducing the risk of damage and injury.
Although the SMITTYBILT Trail Jack 54″ is a fantastic tool for off-road enthusiasts – it is vital to remember that it does take some ability and knowledge to operate properly.
Before using the jack in the field, you should familiarize yourself with its operation by reading the instructions and trying it out first in a controlled setting.
Overall, the SMITTYBILT 54″ Trail Jack is a great product that delivers on its promises. It’s an easy-to-carry jack that can handle a wide variety of off-road situations.
| Pros | Cons |
| Heavy-duty steel was used during the construction | Don’t attempt to use the jack before familiarizing yourself with the instructions |
| It performs quick lifting on a flat surface of up to 4660lbs | |
| Includes a removable handle and a handle isolator |
As a high-quality jack suitable for use with big loads on tough terrain – you should really think about getting this trail jack!
4. Hi-Lift All-Cast Jack 48″
Off-roading has its own unique set of obstacles, but the Hi-Lift All Cast Jack 48″ is up to the task.
This jack can raise automobiles and trucks weighing up to 7,000 pounds, allowing you to get them out of sticky situations in the backwoods with ease.
The Hi-Lift All Cast Jack 48″ stands out due to its sturdy build. Cast and stamped steel make up its whole, giving it the sturdiness and strength required for off-road usage.
The jack’s powder coating is resistant to rust and corrosion, making it suitable for usage in challenging conditions, which I noticed immediately after the first test.
The Hi-Lift All Cast Jack 48″ may be used for a variety of purposes – a wide variety of tasks beyond only lifting, including winching, clamping, and spreading.
The Hi-Lift All Cast Jack’s portability is one of its most appealing features. This 48-inch jack is more manageable than other off-road jacks since it weighs less and takes up less space.
Because of this, it is a great option for those who need a jack but only has space in a car trunk or pickup truck bed.
Safety is also a priority in the development of the Hi-Lift All-Cast Jack. Lifting most trucks wasn’t an issue during all of my test runs, so you won’t need to worry about anything in these instances!
A built-in safety shear pin in the jack prevents it from being overloaded, thus reducing the risk of injury.
Let’s talk about the maximum lift height – 38.63″ might seem like a small height, but I assure you that most trucks will be lifted to an appropriate height.
Although the Hi-Lift All Cast Jack is a great piece of equipment for off-roaders, it should be noted that using it properly does take some training and experience.
Just like with most other models in today’s roundup – a manual is a mandatory piece of equipment that needs to be memorized to the fullest before trying to assemble and use the jack.
The Hi-Lift All Cast Jack, in general, is a high-quality item that lives up to its claims. This jack is strong enough to assist you in overcoming any obstacle you encounter when driving off-road.
| Pros | Cons |
| Maximum lift height is 38.63″ | Don’t try to load above 7000 lbs – even approaching that number should be executed with extreme caution |
| Tensile strength iron casting | |
| red powder coat | |
| Adjustable top clamp |
The Hi-Lift All Cast Jack is a high-quality option for lifting big items and navigating tough terrain – I highly recommend that you give this lifting jack a chance!
5. Hi-Lift UTV Jack 36″
The Hi-Lift UTV Jack is a small yet adaptable device designed for use with UTVs and other off-road vehicles. Its jack has the power to remove even the heaviest UTVs from sticky situations in the wilderness.
The Hi-Lift UTV Jack is notable for being very portable. This jack is 36 inches long, making it more portable and less cumbersome to store than longer off-road jacks.
This makes it a great option for individuals who need a jack that won’t take up too much space in a garage or the back of a pickup truck.
The Hi-Lift UTV Jack was also designed to be used in a variety of situations. This jack can be used for more than just lifting; it can also be winched, clamped, and stretched.
Because of this, it’s a one-stop shop for solving all your off-road problems.
The Hi-Lift UTV Jack’s sturdy build is one of its many advantages. Cast and stamped steel make up its whole, giving it the sturdiness and strength required for off-road usage.
As an added bonus, the jack has been given a long-lasting powder-coated coating that protects against rust and corrosion.
The Hi-Lift UTV Jack was manufactured with security as a primary concern. Its broad, sturdy base makes it ideal for supporting the weight of UTVs.
The jack’s integrated safety shear pin keeps it from being overloaded, protecting users from potential harm.
Although the Hi-Lift UTV Jack is a fantastic piece of equipment for off-road fans, it should be noted that using it correctly does call for some familiarity with such tools.
You should read the handbook and practice using the jack in a safe environment before attempting to use it in the field.
Overall, the Hi-Lift 36″ UTV Jack is a high-quality product that delivers as advertised. If you’re going off-road, this jack will help you get over whatever barrier you come across.
| Pros | Cons |
| A multitool and lightweight design | 36-inch lift might not be enough for your vehicle – test out your needs before deciding on this lifting jack |
| Black powder coat finish | |
| Lifting power of up to 4660 lbs | |
| Flawless lifting process tested and certified to meet all safety requirements |
The Hi-Lift UTV Jack is a high-quality option for those in the market for a jack capable of supporting big loads across tough terrain. You’ll notice a significant difference between your current lifting jack and this one!
6. Hi-Lift Cast & Steel Equipment/Agriculture Jack 36.75″
When it comes to heavy-duty lifting in the agricultural and construction sectors, look no further than the Hi-Lift Cast Steel Equipment Agricultural Jack. This jack has a 7,000-pound capacity, so it can easily handle the heaviest of machinery.
The sturdy build of the Hi-Lift Cast Steel Equipment Agricultural Jack is one of its most notable qualities. The cast and pressed steel construction of the jack make it suitable for frequent, rigorous operation.
As an added bonus, the jack has been given a long-lasting powder-coated coating that protects against rust and corrosion.
It is important to the designers of the Hi-Lift Cast Steel Equipment Agricultural Jack that it serves a variety of purposes.
In addition to lifting, this jack may be winched, clamped, and extended. This makes it a versatile tool for tugging and lifting in a wide range of applications, which I immediately noticed and tested in multiple different situations.
The Hi-Lift Cast Steel Equipment Agricultural Jack’s simplicity of use is another one of its standout features.
The jack’s straightforward layout makes it simple to use, especially for individuals unfamiliar with such devices. Instructions on how to use the jack properly and safely are included.
This unit is also made with security in mind – it has a wide, sturdy base that can support the weight of significant machinery.
This device is built with safety in mind and has a broad, stable base capable of supporting heavy equipment.
The Hi-Lift Cast Steel Equipment Agricultural Jack is a powerful piece of machinery that must be handled with care. Before operating the jack in the field, it’s important to familiarize yourself with the manual and get some experience under controlled conditions.
A heavy-duty jack tends to be difficult to operate with by inexperienced users, so stay wary in that regard!
The Hi-Lift Cast Steel Equipment Agricultural Jack is, in general, a high-quality item that accomplishes its goals. Whether you’re working in agriculture or construction, this jack is up to the challenge of helping you move hefty objects.
| Pros | Cons |
| effortlessly lifting trucks up to 7000 lbs | Reading the manual on how to assemble these kinds of truck jacks is mandatory as the first step. Forgetting to do so might lead to serious injuries. |
| broad and stable base | |
| reliable floor jack made out of cast iron | |
| supports trailers and other equipment |
The Hi-Lift Cast Steel Equipment Agricultural Jack is a great choice if you need a jack that can lift huge loads and operate in harsh environments.
7. Hi-Lift All-Cast Jack 60″
If you have continuously dreamt of possessing a big red floor jack that’s made from heavy-duty steel and has a weight capacity of up to 7000 lbs – then let me introduce you to the Hi-Lift All-Cast 60″ truck and car jack.
Off-roaders and other outdoor enthusiasts will get great use out of the Hi-Lift All-Cast Jack. This jack measures 60 inches and is constructed from long-lasting cast iron and steel.
The jack’s all-cast design makes it seem modern and sophisticated, making it a great accessory for any car or camping gear.
The Hi-Lift All-Cast Jack’s adaptability is a notable quality. Its multifunctional design allows for hoisting, pulling, pushing, and even winching. Because of this, it is a must-have item for anybody who enjoys off-roading, camping, or exploring uncharted territories.
The Hi-Lift All-Cast Jack may be used to replace a tire on rough ground, free a trapped car, or lift and transport large objects.
The jack’s straightforward construction makes it easy to operate. The jack’s handle is ergonomically designed, and it has several height settings.
You may adjust the angle to suit your specific lifting or pulling demands. The jack’s safety shear bolt protects it from being overloaded, so you can use it knowing it won’t hurt you or your car.
The weight capacity of the Hi-Lift All-Cast Jack is another outstanding quality. It has a maximum lifting capacity of 7,000 pounds, making it suitable for a wide variety of vehicles and heavy machinery trucks.
The jack is an essential piece of equipment for any serious off-road explorer due to its high weight capacity and adaptable design.
The Hi-Lift All-Cast Jack is not only practical but also aesthetically pleasing. The jack’s components, made of polished cast iron and steel, give it a sophisticated appearance.
The compact form of the jack makes it simple to keep in your car or equipment bag.
| Pros | Cons |
| all heavy-duty trucks and other heavy vehicles can be lifted effortlessly | Although it might seem like a compact model – I should point out that you’ll need to spear a larger space to fit this unit comfortably. |
| straightforward construction contributes to the ease of use | |
| multiple safety features | |
| aesthetically pleasing to have and use |
In conclusion, the Hi-Lift All-Cast Jack is an outstanding accessory for any off-roader, camper, or explorer. Its adaptability, strength, and stylishness set it apart from competing products. This jack is perfect for any off-roader, whether they are seasoned pros or just starting out.
8. Hi-Lift Cast & Steel Jack 60″
The Hi-Lift Cast Steel Jack is a high-quality and long-lasting tool made for off-roaders and outdoor explorers who want a dependable device to assist them in completing a wide range of jobs in challenging environments.
This jack is constructed from high-quality cast steel, making it robust and long-lasting, even when subjected to severe circumstances or loads.
The adaptability of this jack is one of its most notable qualities. A versatile and important tool for any off-road enthusiast, it may be used to lift, pull, push, winch, and clamp a wide variety of materials and objects.
Because of its two-piece handle and socket construction, it can be quickly and easily assembled and disassembled for storage or transportation.
Also made with security in mind is the Hi-Lift Cast Steel Jack. The lifting mechanism is protected from overload by a shear bolt, and it can’t be accidentally disengaged by a safety latch.
In addition to my previous discoveries about this unit, it has a powder-coated finish, which not only makes it highly durable and long-lasting but also protects it against rust and corrosion.
The exceptional lifting capacity of its jack is only one of several advantages offered by this product. Since it can lift a maximum of 7,000 pounds, it is an excellent tool for use when dealing with weights of significant size.
There were no challenges whatsoever during my test runs in that regard!
This is especially significant for those who like off-roading and want a jack that can retrieve a stranded car or pull a vehicle out of a mud trap.
The Hi-Lift Cast Steel Jack is simple to use, which I agree with as a definite plus. The ergonomic handle makes it simple to hold onto, especially while wearing gloves.
The length of the handle is intended to produce leverage, allowing substantial weight to be moved with very little exertion. The jack’s height may be readily and rapidly modified by means of a flexible and user-friendly mechanism.
One thing to keep in mind is that this jack is extremely cumbersome due to its weight. Because of its weight of roughly 30 pounds, it is not always suited for all off-road aficionados!
It is sturdy, long-lasting, and can easily carry huge loads, making it an essential tool for any off-road enthusiast. It’s hefty, but it’s a small price to pay for a jack that can handle tough jobs and give you peace of mind no matter the weather or terrain.
| Pros | Cons |
| it offers an excellent hydraulic system and a mechanical advantage when compared to most other jacks | due to weighing roughly 30 pounds – most maneuvering will force potential fatigue, especially if you need to move it around frequently in a short span. |
| superb lifting range and capacity for a truck jack |
The Hi-Lift Cast Steel Jack, in conclusion, is a high-quality and multipurpose piece of gear made for off-road enthusiasts and outdoor explorers who require a dependable jack to aid them with a range of jobs in harsh environments.
9. Hi-Lift Cast & Steel 48″ Jack
If you need a jack that can handle the heavy lifting, look no further than the Hi-Lift Cast Steel 60” Jack. Its jack’s solid construction from cast steel means it will survive through years of use.
In this evaluation, I’ll go over the specs of the Hi-Lift Cast Steel Jack and provide my opinions on its functionality, durability, and cost-effectiveness.
This jack’s ability to raise heavy loads is a notable characteristic. This makes it perfect for transporting heavy equipment and cars through rough terrain.
The jack can raise heavy cars, including pickup trucks and sport utility vehicles, with its 7,000-pound capability. In addition to lifting, pushing, pulling, and winching, the jack has many other uses as well.
Safety is also a priority in the development of the Hi-Lift Cast Steel Jack. The two-piece handle and safety shear bolt prevents the jack from collapsing under excessive weight.
The jack’s broad, solid base offers extra stability and safeguards against accidental tipping over. The top clamp/clevis on the jack facilitates a secure connection to the lifting point.
The Hi-Lift Cast Steel Jack’s long lifespan is another benefit. The jack is durable and capable of supporting significant weight since it is crafted from high-grade cast steel.
Powder coating provides further protection against the weather and corrosion of the jack. The jack is backed by a guarantee for a full year, giving you even more security.
The Hi-Lift Cast Steel Jack delivers as promised in terms of performance. The jack may be raised and lowered with little effort and maximum control.
The jack’s safety shear bolt prevents it from overloading, and the two-piece handle is easy to hold. The jack’s broad, solid base offers extra stability and safeguards against accidental tipping over.
I can assure you that you’ll never experience a loose grip!
If you’re in the market for a high-quality, heavy-duty jack, the Hi-Lift Cast Steel Jack is a great buy. Although it may not be the cheapest jack available, the strength and reliability it provides make it well worth the price for anybody who often does heavy lifting.
To sum up, the Hi-Lift Cast Steel Jack is a premium model capable of handling the most demanding lifting tasks. It is perfect for lifting, pushing, pulling, and winching because of its tall lifting capacity, its ability to handle up to 7,000 pounds, and its adaptable design.
| Pros | Cons |
| superb cost-effectiveness | The price of this hydraulic floor jack might be expensive for some customers |
| 1-year warranty | |
| unrivaled performance | |
| excellent safety features |
The jack is constructed from long-lasting cast steel to guarantee it can support significant weight without breaking.
10. Hi-Lift PJ Harrah Signature Edition 48″ Jack
To begin, it’s important to point out that the Hi-Lift brand is largely considered to be among the most dependable and long-lasting jack manufacturers available. It’s evident that a lot of time and effort was put into designing the PJ Harrah Signature Edition Jack, and it shows.
I have been a regular customer and have performed countless tests on their products – let’s discuss what I have noticed about this unit.
This jack’s sturdy build is one of its most notable qualities. It’s built to endure the elements with its sturdy steel construction and powder-coated finish. Because of this, the Hi-Lift PJ Harrah Signature Edition Jack can be counted on in any situation, whether you’re on the trail or in your driveway.
The Hi-Lift PJ Harrah Signature Edition Jack’s adaptability is another one of its many strengths. This jack may be used for everything from getting your car out of a jam to extracting fence posts from the ground.
The jack’s height range of up to ensures you can operate with a variety of cars and items, and the accompanying winch clamp makes it easy to raise hefty things.
The Hi-Lift PJ Harrah Signature Edition Jack is the best in its class when it comes to security. In the case of an accident, you and your car will be protected thanks to the jack’s special safety shear bolt.
You may work without worrying about the jack toppling over since its climbing pegs are designed to keep it in place.
The Hi-Lift PJ Harrah Signature Edition Jack is a big piece of machinery, so keep that in mind!
I was surprised to find out that this truck jack weighs approximately 30 pounds! It’s evident that the jack is made to endure, and its resilience and adaptability more than make up for its heft.
Overall, the Hi-Lift PJ Harrah Signature Edition Jack is an excellent choice for anybody in the market for a sturdy and adaptable lifting solution.
| Pros | Cons |
| superb durability and endurance | best floor jacks usually don’t weigh approximately 30 pounds – it’s up to you to decide if you regard this as a negative attribute |
| robust materials used during production | |
| ergonometric design |
No matter whether you’re a skilled mechanic or simply like tinkering around with your own car, this jack will serve you well. Its outstanding height range, adaptable design, and solid build make it a great pick for anybody in the market for a jack that can stand up to heavy use.
Frequently Asked Questions of Customer when looking for the best floor jack for lifted truck
1. How to jack up the front of a lifted truck?
Whether you’re lifting the front or rear end of your lifted truck, specific rules always apply – finding the right spot, choking the wheels, and identifying a secure jacking point.
For a more specific scenario, like lifting the front of a lifted truck, you should choose a jacking point that’s halfway between the wheels or just behind the appropriate wheel. Some vehicles have dedicated jacking points, but if not, position the jack under the sub-frame, precisely between the front wheels.
2. What kind of jack do you use for a lifted truck?
Choosing the right kind of jack for a lifted truck is vital – but it doesn’t have to be complicated.
A lifted truck will, on average, be at least three inches taller than a standard pickup and quite massive, as well. So, in essence, you need to check the structural integrity, maximum load capacity, and lift range of the jack to ensure that it can “handle” your vehicle – and that’s pretty much it.
3. How high will a floor jack lift?
The maximum lifting range of the floor jack is quite an essential factor, especially when you’re lifting an off-road vehicle or an SUV. The thing is, SUVs are generally taller than your standard economy car, which automatically means that you’ll need a floor jack with a high enough lift range to get your vehicle up in the air.
A maximum height range of 16 to 20 inches should be high enough to lift your car – and most models on my list are well above that range spectrum – but perform one final check before your purchase.
4. Will a 3-ton jack lift a truck?
A three-ton jack should be more than enough to lift almost any passenger car or truck because, even in the worst-case scenario, it will likely support roughly 60 to 70 percent of the truck’s total weight.
For example, if your truck weighs approximately 7000 pounds, you’re still looking at around 5000 pounds that you need to lift – something that even a 2.5-ton floor jack can theoretically lift, let alone a three-ton one. So, numbers-wise, you should be fine.
5. Where is the best place to jack up a truck?
Learning to jack up and support your car correctly can make all the difference in the actual repair, as well as your safety. It’s important to remember that various vehicles have different support points; you should always start by referring to the owner’s manual to find a secure jack point in the specific area of your car that you want to lift.
The best point to jack up a truck would be an area that’s specifically designed for it or a position that you know can support the vehicle’s full weight safely without slipping off the floor jack.
Conclusion
The best floor jack for lifted trucks will be the one with a high enough weight capacity to withstand your truck’s weight and can lift it high enough to accommodate the extra height of a lifted truck. Even more so, you’ll benefit from it being reliable, with a broad, stable base and safety features to protect you from potential accidents or even injury.
In my modest opinion, I would have to say that currently, the best floor jack is the Hi-Lift X-Treme Jack 60″.
The only downside of this unit is the one-year limited warranty – I strongly believe that you won’t need to use it a single time during that time frame, but be my guest to try it out and find out for yourself why it’s the best floor jack!
I am Dave McCurdy I am the content developer on the ecodrivingusa.com website. I have 6 years of experience in marketing as an automotive major.
