When you find yourself on the underside of your vehicle – changing a tire or doing a quick repair – you want to have a floor jack that you can, quite literally, trust with your life.
And on that note, for mid to full-size cars, SUVs, trucks, and even larger vehicles that don’t weigh over 6000 pounds, I recommend that you go with the best 3 ton floor jack that you could afford.
I tested quite a few and picked out those that beat the competitors by a long shot. Whether you’re a DIY-er or a professional, I’m sure you’ll find your floor jack today!
Top rated 10 Best 3 Ton Floor Jacks in 2020
For those who have a strict budget and can’t afford an expensive floor jack, it doesn’t get much better than the Big Red.
The pocket-friendly price tag doesn’t mean inferior quality, though – the Big Red is a heavy-duty floor jack capable of lifting three tons.
One of the exciting features of this floor jack’s design is that lifting and lowering the load is controlled by two separate mechanisms, as opposed to most other models you’ll see today.
I get that some of you might find this annoying, but I like the uniqueness of it – and the added element of control it provides when it’s time to lower the vehicle.
Also, it has a higher-than-average lift range, going up to 21 inches, thanks to the extra-long neck. That’s one of the reasons why I like to use this one when working on SUVs and lifted trucks.
It is, however, impossible to fit it under low-slung vehicles because of its height. So, if that’s what you’re after, keep looking.
- Heavy-duty construction
- A 21-inch maximum lift range
- Extra-long neck for lifted trucks and SUVs
- Separate mechanisms control raising and lowering
- Includes 360-degree swivel casters
- Safety bypass prevents overloading
- Doesn’t fit under low-slung cars
|If you need your floor jack to go the extra mile for you and your SUV or lifted truck, the Big Red’s lifting capacity, height range, and extra-long neck won’t disappoint – ever!|
I showed you my first pick for the best floor jack, but the list doesn’t end there – this Pittsburgh Automotive three-ton floor jack is every bit as good! If you value speed and precision, a regular jack won’t cut it – and no other model comes close to this floor jack’s performance!
The robust, precision-welded construction and the industrial-grade finish are already a good indicator that this is a tough guy that you don’t want to mess with – but it’s the actual lifting capabilities that will blow your mind.
This floor jack is all about speed and boasts a dual parallel pump system – the so-called Rapid Pump technology – as its signature feature. It takes no more than three and a half pumps to lift any vehicle within the jack’s 5 to the 18.25-inch range. How’s that for fast?
And thanks to the universal joint-release mechanism, you get excellent load control and precision, regardless of the handle’s position. I like that I can lower the vehicle in a controlled, slow manner.
The 78-pound weight is a bit much, but I don’t consider that a deal-breaker – merely something to keep in mind.
- Super-tough construction and industrial-grade finish
- Rapid Pump dual parallel pump system ensures lifting speed
- Universal joint release mechanism ensures control
- 6000-pound capacity and 18.25-inch maximum lift range
- It’s fairly heavy
|If you’re looking to speed things up without compromising control, this Pittsburgh Automotive jack with Rapid Pump system is the way to go!|
The Craftsman floor jack’s one of those essential tools that everyone should have in their garage – not because it’s somehow better than the rest, but because it’s a three-in-one deal:
You get a 3-ton floor jack, two jack stands, and a 36-inch creeper – and if that’s not an excellent pick for any DIY enthusiast out there, I don’t know what is!
The heavy-duty floor jack has a welded construction, and with a load capacity of 6000 pounds and the hydraulic lift cap, I already expected this one to be a powerhouse.
It was nice to see the little touches, like the built-in headrest on the creeper that’s designed to improve your comfort levels during extended or complicated repairs. Plus, at 36 inches, it provides plenty of space and comes with smooth-rolling casters so that you can move around freely.
And when you do lift your vehicle to the 19.25-inch maximum, you can use the included jack stands to keep it there.
Lowering the vehicle is somewhat finicky, and you have to be super careful – even the slightest touch will cause it to drop quickly.
- A three-in-one floor jack set
- Utilizes hydraulic lift cap for easier lifting
- The 36-inch creeper has smooth-rolling wheels and headrest
- Twin jack stands for supporting the vehicle
- Lowering the car is a finicky process
|If you’re hoping to kill three birds with one stone here, it doesn’t get much better than the Craftsman’s 3-ton floor jack set!|
I promised to focus on three-ton jacks, but I had to show you this highly practical, low-profile floor jack by SUNCOO – even if it has a slightly lower, 1.5-ton load capacity.
If you want a floor jack that fits under most vehicles, SUNCOO could be the right fit for the job.
Its aluminum steel plate construction’s every bit as durable and reliable as the other models on my list – even though it weighs half as much, clocking in at a mere 34 pounds.
It comes fitted with a dual parallel pump system and universal joint release for precise load control, which made it surprisingly easy to use. I could lift most cars to the maximum lifting height with few pumps, which saved me time and energy more than once.
Also, it’s nice to see these highly practical touches, like the antiskid tray that prevents the jack from damaging your car.
The only drawback is that it can’t lift as much as the rest of the bunch – but it’s more than enough for a lightweight car.
- Dual parallel pump system saves time and energy
- The universal joint release allows precise load control
- The antiskid tray ensures a secure grip and prevents damage
- Weighs only 34 pounds
- Has a limited load capacity of 1.5 tons
|If you want a low-profile floor jack that can reach under low-slung vehicles, this might be it – if you’re okay with the 1.5-ton capacity, that is.|
Now, this next pick is a bit of a puzzle for me. I liked what it has to offer aesthetics and performance-wise, but I’m not entirely sure if it’s worth the money.
Still, I wanted to take a moment to show it to you – and maybe we can figure this one out together?
Don’t get me wrong, though; there is plenty to love about the NOS NSJ0301 floor jack – especially if you value a good-looking tool. I mean, in the world of three-ton floor jacks, this one’s a beauty.
Plus, it does have a lightweight, but durable aluminum construction, coupled with thick side plates and a reinforced lift arm that contributes to the overall strength and durability.
The dual pump piston takes care of the heavy loads for you and lifts them to a height of over 18 inches with ease – all while the safety valve keeps you safe from accidental overloads.
So, what’s the issue, then?
Well, it’s not an affordable option – and unfortunately, the quality of the parts and the general longevity don’t justify the price tag. I had a wheel come off in a matter of weeks!
- Aluminum construction with a reinforced lift arm
- Features dual pump piston for quick and easy lifting
- Safety valve prevents overloading
- Relatively lightweight
- Relatively expensive
- May not last very long
|The NOS NSJ0301 is undoubtedly the prettiest of them all and a solid choice, too – while it lasts.|
Can we take a minute here to acknowledge how cool-looking the JEGS 80077 is? I mean, look at it – it’s designed as a little race car! I picked it up because of the coolness factor, but I quickly learned that it offers a whole lot more than just good looks.
I often find myself reaching for it when I’m working on low-clearance vehicles and sports cars because of its low-profile design that sits at 3.5 inches. The aluminum construction keeps the weight at an acceptable 58 pounds, and the wheels only add to the portability.
Another thing I liked was the handle. The 50-inch length is highly functional and convenient as is, but the added protective sleeve and knurled grip that prevents it from slipping during use are much appreciated, too.
The rotating saddle and the dual side handles make it easy to maneuver and position, which is always a plus.
All this does come at a price – and not a budget-friendly one. It’s one of the more expensive options I’ve tested, but it’s worth every penny.
- Low-profile design suitable for low-clearance vehicles
- A 50-inch handle with protective sleeve and knurled grip
- Features overload and bypass valves
- 360-degree rotating saddle with a protective rubber lift pad
- Easy to maneuver and position
- It’s expensive
|Don’t be fooled by its compact, almost miniature, size – the JEGS 80077 is as impressive as they go in the low-profile floor jack category!|
If you’re struggling to decide whether steel or aluminum construction is a better choice of material for floor jacks, why not try a combination of both?
The Powerzone 380044 jack offers the best of both worlds:
This hybrid jack features an aluminum frame, which ensures lightweight, rust-resistant construction, but comes fitted with a two-piece steel handle for ultimate strength and durability.
The quick-lifting hydraulic system helps make every job more comfortable, too. You’ll get your car up in the air in half a dozen pumps!
The four-inch profile – with a maximum lift range of 18.25 inches – and 6000-pound capacity make it a solid choice for a variety of vehicles. And while it can lift tons, it doesn’t weigh a ton itself; at 59 pounds, this four-wheel floor jack is incredibly portable.
Both the saddle and the handle have protective padding to prevent accidental damage, while the floor jack has a safety valve that prevents you from overloading it.
The bolts do seem poorly made compared to the rest of the floor jack, though – and they keep falling out, too!
- A hybrid that combines aluminum and steel
- Relatively lightweight and portable
- The saddle and handle feature protective padding
- Quick-lifting hydraulic system reduces user fatigue
- Equipped with safety features to prevent overloading
- Somewhat pricey
- Low-quality bolts
|It’s pretty easy to see why the Powerzone is such a popular model – you get the best of both worlds in this highly reliable package!|
If you’d like to go slightly over the three-ton lifting capacity, this beast of a jack should be right up your alley:
The Blackhawk B6350 is, by far, the most powerful option you’ll see today – and one that’s all about quick and easy lifting, too.
The heavy-duty steel body gives this jack a signature robust feel that’s perfect for quick off-road repairs and tire changes. It’s easy to see why it’s such a popular choice among handymen, technicians, and car mechanics.
However, its main selling point – at least for me – was its exceptional load capacity of over three tons, which blows the competition out of the water when it’s time to lift heavier-than-average vehicles. The fast-lifting technology and swivel saddle are nothing short of amazing, too, as they make the whole process incredibly easy.
Most importantly, it comes with all the essential safety features – a safety valve that prevents accidental overloading and a built-in bypass that prevents over-pumping.
The 85-pound weight is a bit too much to haul around – even with the casters included.
- Has a capacity of over three tons
- Maximum lifting range is 22 inches
- Swivel saddle makes it easy to position the jack
- Includes safety features
- Fast-lifting technology makes it easy to use
- It weighs 85 pounds
|The 7000-pound load capacity of the B6350 makes this one a real beast among floor jacks – and you’ll be hard-pressed to find a vehicle that it cannot lift with ease!|
I’m taken aback by how reliable, secure, and well-made the ALJ3T feels every time I use it. But besides the reminders that it’s the best 3 ton aluminum floor jack, the hefty price can be somewhat of a shocker, too.
If you’re up for spending more for a premium-quality floor jack, though, buying the ALJ3T will be money well spent.
The outstanding aluminum build lends it the signature lightweight durability – something that’s not often seen in three-ton jacks. It weighs a mere 56 pounds, but can still lift three tons like it’s nobody’s business.
What makes it stand out, though, are the dual pump pistons that ensure a smooth, fast lifting action anywhere within its versatile lifting range, and – this is my favorite part – a reinforced lift arm that adds to the jack’s strength.
Plus, the manufacturers implemented several safety mechanisms – but that’s to be expected at this price point. What’s unique is that it protects your vehicle, too. It has a rubber saddle and a foam bumper on the handle.
The only potential downside here is the not-so-affordable price tag.
- Lightweight aluminum construction
- Includes safety features, rubber saddle, and foam bumpers
- Fast and easy lifting ensured by dual pump pistons
- Reinforced lift arm for added strength
- Castors for added portability
- It’s expensive
|The Arcan ALJ3T might just be the best 3 ton floor jack for the money – if you’re okay with spending that much, that is.|
LiftMaster has long been considered one of the automotive industry’s leading brands – and I had to give them a spot on my list.
Plus, I figured that it’s worth recommending to those looking for the best 3 ton floor jack under $200!
What makes it stand out is its incredibly low, three-inch profile that can fit under even the lowest of vehicles with ease. It’s still perfectly capable of lifting weights of up to three tons to a maximum height of 20 inches, so it works for lifted trucks and SUVs, too.
Another welcome feature is that it’s designed not to cause damage to the vehicle:
The wide saddle is coated with textured rubber to give you a sturdy base while also preventing scratches, and the knurled, two-piece handle features a foam bumper that works to protect both your hands and your car.
It’s not without its issues, though:
It does develop dents rather quickly, especially during shipping. Also, you have to tighten the handle to an extreme degree. Otherwise, it leaks air and loses pressure.
- Knurled, two-piece handle with a foam bumper
- Ultra-low, three-inch profile fits under most cars
- The 20-inch lift works for lifted trucks
- Dual pump system
- Develops dents and scratches easily
- Has to be super tight or it loses pressure
|Whether you drive a lower-than-standard car or a lifted truck, this ultra-low-profile floor jack by LiftMaster will fit the bill!|
Best 3 Ton Floor Jacks FAQs
1. Who makes the best 3 ton floor jack?
Torin, Arcan, Blackhawk – these are but a few names that instantly pop in my head whenever I’m discussing the best floor jack manufacturers. Their products, some of which you’ve seen today, are the ones that I’m always comfortable recommending.
However, I don’t think that you should focus on brands and manufacturers as you make your final choice. Instead, make sure that the floor jack at hand is safe to use and meets your needs – even if it comes from a less known brand.
2. Do I need a 3 ton jack?
Yes, you most certainly do. We all know that your jack never lifts the entire weight of your vehicle – realistically speaking, only 60 to 70 percent of your car’s weight will be supported by the jack. But still, operating at the very edge of your jack’s load capacity is a recipe for disaster.
That’s why I always recommend a three-ton jack – even if your car’s total weight falls short of 7000 pounds, the extra clearance is still welcome safety and functionality-wise.
The search for the best 3 ton floor jack can quickly become confusing enough to make you want to throw in the towel. The options are numerous – and even to an experienced buyer, choosing one can be an overwhelming task.
So, I do hope that, amid all this confusion, my guide managed to provide some vital info and help you make your choice.
And in that sea of three-ton floor jacks, the Torin T83006 stood out like a sore thumb – in a good way, of course!
I am Dave McCurdy I am the content developer on the ecodrivingusa.com website. I have 3 years of experience in marketing.