Lifted trucks and SUVs are all the rage at the moment.
They’re considerably higher than a conventional vehicle, though, and when it’s time for a quick repair or tire change, you need a jack lift that has a high enough lift range. Even more so, they’re also more substantial than cars – and your jack needs to be capable of holding the extra weight safely.
But what’s the best floor jack for lifted trucks?
To help you make this important choice, I researched and compared the market’s leading options – and narrowed it down to the following jacks for your lifted truck.
The 10 Best Floor Jack for Lifted Trucks in 2020
The search for a reliable, heavy-duty jack can be a challenge – and you want to be confident that you’re getting the right tool for the job. That’s where the Powerbuilt 620422E comes in as a remarkable, versatile tool for both workshop owners and savvy DIY enthusiasts.
The patented design incorporates both padded lift rails and a removable lift saddle, which is what makes this one such a versatile tool – a multi-purpose jack that will work with an array of speciality vehicles, from motorcycles and cars to trucks and ATVs.
The 4000-pound capacity adds to that versatility even further.
The rugged build is another outstanding aspect of the 620422E heavy-duty jack that makes it a worthwhile investment, as it was specifically designed to perform under the most challenging conditions.
Also, it comes with essential safety features, including a broad base for added stability, as well as tie-down points. Even more so, it has a locking bar designed to hold the jack in place once your vehicle is in the air.
It does weigh a hefty 85 pounds, which isn’t ideal portability-wise – but it does come with a handy set of wheels, so I don’t think that the weight should be a deal-breaker.
- Patented, multi-purpose design with padded lift rails and removable saddle
- Has a weight capacity of 4000 pounds
- Features a broad base and tie-down points
- Locking safety bar will keep the jack in place when the vehicle is lifted
- Has wheels for portability
- The jack weighs 85 pounds
- It’s very pricey
|The Powerbuilt 620422E with 4000-pound lifting capacity, flexible design, and locking safety bar has to be the best floor jack for trucks – and the most versatile one, as well!|
Hi-Lift’s HL484 is a highly versatile and rugged mechanical jack with the ability to complete a wide range of heavy-duty tasks with ease – and I think of it as one of the most versatile tools you could buy.
Hi-Lift’s been producing nothing but highest quality products for over a century; you know that you’re in for a treat – and an affordable one at that.
Everything about this high lift floor jack is exceptional, starting from the construction that combines cast and four high-strength stamped steel components for maximal durability. And while I’ve certainly tested a few lighter models, at 28 pounds, the HL484 is anything but heavy or bulky.
A highlift jack is one of those tools that you’ll put in your trunk and forget all about it until it’s time to put it to work.
Furthermore, despite the relatively light construction, it has a rated load capacity of 4600 pounds – the tested load capacity is 7000 pounds – which is more than enough for most applications. Also, I like the two-piece handle design, because it reduces the risk of it bending under pressure, which is a common problem in mechanical jacks with one-piece handles.
I did notice that the paint chips reasonably quickly, which could lead to rust further down the line. Other than that, though, I have no other complaints.
- Rated for a 4600-pound load capacity
- Rugged and durable cast and steel construction
- It’s a relatively lightweight
- Two-piece handle withstands pressure without bending
- Equipped with a shear bolt as an overload protection
- Paint chips off the jack easily
|If you want a mechanical jack for heavy-duty situations, go with Hi-Lift HL484. It might be different from what you’re used to, but it’s worth it in the long run!|
The brand’s made its name by producing high-quality, durable bottle jacks available in various sizes. So, if anything, you can rest assured that you’ll find one that’s perfect for the job if you decide to give Torin a chance!
The Big Red hydraulic bottle jack is a useful option worth considering as it comes with a rather impressive lifting capacity of 12 tons or approximately 24000 pounds. It can lift your vehicle to 18.25 inches off the ground, which is more than enough for a quick tire change or minor repairs.
The jack has a sturdy alloyed steel frame, durable enough for both commercial and residential use, and an inner and outer welded structure that’s sure to deliver a leak-free performance. At the same time, though, it maintains a surprisingly lightweight construction, weighing as little as 5.1 pounds.
The glide-action pressure lifts vehicles with minimal effort, while the built-in oil bypass and overload valve work as safety features that protect the hydraulic system from accidental overloads. Even more so, it meets ASME PASE safety standards for an added peace of mind.
It’s not without its issues, though. I’ve found that it doesn’t quite fit under lower-than-usual vehicles, and I’ve had several instances where it leaked hydraulic oil.
- Sturdy and reliable alloyed steel welded construction
- Built-in safety overload system
- Outstanding 24000-pound lifting capacity at an 18.25-inch height
- Glide action pressure pumps lift the vehicle with minimal effort
- Generous lifting area and secure grip
- Surprisingly lightweight
- Budget-friendly option
- Possible hydraulic oil leaks
- Doesn’t fit under low-profile vehicles
|This jack has the most impressive lifting capacity of all the units I’ve tested so far. Whether you want the best floor jack for Jeep Wrangler or heavy-duty trucks, this is a model that would never fail you!|
The Torin Big Red Steel Scissor Jack could be the replacement jack that you’re searching for – a compact unit that proves that the good things can sometimes come in small packages.
I was instantly impressed by how small, and compact the jack is, without feeling flimsy or unreliable. The jack’s construction boasts drop forged alloyed steel that ensures quality and durability, but at the same time, it weighs no more than 7.7 pounds – and can lift 3000 pounds to a height of a little over 15 inches.
So, whether you’re changing tires or need a replacement jack that would sit in your car’s trunk for emergency repairs, this is the way to go. Not only is it the most compact one out of the bunch thanks to its collapsible design but is one of the most affordable options on my list, too.
And while a lot of scissor jacks struggle with maintaining stability, this isn’t the case for this Torin model. The jack comes fitted with an extra-wide base that adds stability and strength, while the one-piece handle delivers quick and responsive lifting. Even more so, it meets ANSI/ASME PASE safety standards.
While it can support most vehicles, it’s not exactly suited for heavy-duty trucks and SUVs because of its relatively limited load capacity, though.
- Rugged, drop forged alloyed steel construction
- Collapsible, compact and portable design that weighs 7.7 pounds
- Oversized base improves the jack’s stability
- The one-piece handle ensures quick and easy operation
- Load capacity limited to 3000 pounds
|The Torin Big Red jack is an affordable, storable, and powerful option – and one that fits both the durability requirements and the budget needs of most drivers – which makes it my top pick for a portable jack for lifted trucks.|
The design of the Powerbuilt 620471 Unijack is a rather exciting concept – it combines the features of a bottle jack and jack stands for lifted trucks, all in one. That means that you can raise your vehicle, and then hold it up safely, all while using the same tool.
So, if convenience is an essential factor for you, this Powerbuilt tool could be a solid choice.
The main advantage of this floor jack is its user-friendly design, starting with the fact that it arrives pre-built, and doesn’t require much assembly. Even more so, it comes with a saddle and a safety pin, a feature that’s more often seen in jack stands.
That brings me to the best part of the Unijack’s functionality – the ability to serve both as a bottle jack and a stand. It can lift to 6000 pounds of load at a maximum height of 21 inches, and keep it there thanks to the safety pin and a broad, flat base that adds stability.
I do have to say that the handle is ridiculously short, though. I’m not sure if this is a deal-breaking feature or not, but it does require you to get in there – under the vehicle, that is. You might benefit from a floor jack extension for lifted trucks.
- Serves as a bottle jack and a jack stand
- Lifts and holds up to three tons
- Safety bar locks the jack at the desired height
- Maximum lift range is 21 inches
- The broad, flat base ensures stability
- Lightweight design
- The handle is too short for safe use
- Might require floor jack extension for lifted trucks
|If you’re generally a fan of Powerbuilt jacks, but need a slightly higher lifting capacity to meet your needs, this model can be the perfect solution for your truck.|
Whether you’re a DIY enthusiast or a seasoned mechanic, a compact, sleek, and versatile floor jack can be a welcome addition to your tool collection – especially when it doesn’t cost an arm and a leg. That’s where the Arcan XL20 comes in:
It’s a compact, low-profile floor jack that packs all the features and functionality of a full-sized model in a space-saving, budget-friendly design.
It offers exceptional versatility with a low-profile frame that allows access to low-ground-clearance vehicles. Plus, it has a two-ton capacity and a dual pump piston that can lift any car fast, with no more than a few pumps, at the height of up to 18.5 inches.
The universal joint release mechanism gives you control and precision over the jack’s operation, too. On that note, it packs vital safety features, including overload and bypass valves to prevent accidental over-extension or stop you from going beyond its two-ton capacity.
Besides the actual compact design, it also boasts a handy, two-piece handle, which means that it won’t take up much storage space – a plus for small garages and limited workspace areas.
It’s relatively heavy, though, and it does have a slightly lower lifting capacity compared to some other models on my list, which could be considered a deal-breaker for those who with heavy vehicles.
- Low-profile design for low-ground-clearance vehicles
- Two-ton capacity with an 18.5-inch lift range
- Dual pump pistons for quick and effortless lifting
- The universal release mechanism for controlled operation
- Foam handle bumper and rubber saddle for vehicle protection
- Two-piece handle for convenient storage
- It’s quite heavy
- Not suitable for vehicles that weigh over two tons
|If you don’t need an insanely high lifting capacity, this two-ton, low-profile jack can be a versatile, easy-to-use choice for your low-ground-clearance vehicle!|
When you need to lift a lower-than-usual vehicle, a regular floor jack won’t cut it. You’ll need a low-profile jack to get the job done, and the Pittsburgh Automotive is one solid choice to consider here.
It’s very much designed in the same manner as a typical steel-chassis trolley jack, with the difference being the lifting arm itself:
It’s positioned lower than a standard lifting arm, which makes the jack easy to slide under lower-set vehicles.
The super robust design is another remarkable feature of this low-profile floor jack, with a precision-welded construction and an industrial-grade finish. In short, it’s heavy-duty – and it can lift loads of up to three tons quite easily, thanks to the integrated rapid-pump, dual parallel pump technology.
Furthermore, the maximum lifting range is shy of 20 inches, which should be enough for most jobs.
I’m also a fan of the universal joint-release mechanism, which enhances the precision and gives you better loading control, regardless of the handle’s position and height. Lowering your load can be done in a precise and slow manner, too.
Plus, it has sturdy, wider-than-usual casters for added stability.
I found it to be heavy at 79 pounds, but I’m willing to let it slide because it does feature a steel housing – and I’m okay with a slightly heavier jack if it promises sturdiness and durability.
- Suitable for low-profile vehicles
- Industrial-quality, super-tough, precision-welded construction
- Lifting capacity of three tons
- Fast-raising jack due to dual-piston technology
- Two-piece handle design for convenient storage
- It’s relatively heavy
|The low-profile jack by Pittsburgh is pretty much the perfect combo of quality construction, reliable performance, and affordability. There’s not a single reason to not give this one a try!|
Impressive strength, remarkable reliability, and exceptional construction – those are the words that I would use to describe the Arcan ALJ3T floor jack. But I’m going to lie – the Arcan ALJ3T does cost quite a bit of money.
If you’re okay with paying a premium price, though, know that it will be money well spent. This floor jack, although relatively lightweight at 56 pounds, still boasts an exceptional lifting capacity of approximately three tons.
The secret here is in the aircraft-grade aluminum construction, which keeps it lightweight enough to ensure mobility, yet ensures solid, reliable performance even under heavy loads.
The dual pump pistons work to raise the floor jack’s saddle to the load, while the reinforced lift arm ensures increased strength. At the same time, it incorporates two safety mechanisms in its design – the bypass and overload valves will minimize the risk of overextension or overloading the jack beyond its capacity.
Even more so, I was glad to discover that it not only includes safety features but protects your vehicle, as well. The foam handle bumper and rubber saddle are there to prevent any accidental scratches and damage to your car, which is a huge plus.
Seriously, the only thing that might bother you is the price tag.
- Lightweight, 56-pound aluminum construction
- Rear casters and wide-track front wheels for mobility
- Safety bypass and overload valves prevent overextension and overloading
- Foam handle bumper and rubber saddle protect your car
- Dual pump pistons with a fast-lifting capacity of three tons
- It’s somewhat expensive
|The aluminum construction and wheels of the three-ton ALJ3T show that the best floor jack for trucks doesn’t need to be overly burdensome to get the job done!|
The Blackhawk B6350 lift service jack is an outstanding option for quick and easy lifting – and, might I add, it’s a real beast of a jack, too:
The heavy-duty steel construction gives it a sturdy and robust feel and is suitable for off-road tire changes and other necessary repairs. I’d even say that it’s rugged enough to withstand regular workshop use on most modern SUVs and trucks.
The feature that I was most excited about, though, was that this monstrous 7000-pound capacity floor jack comes loaded with safety features that make it surprisingly user-friendly – especially for those who don’t have much experience with this type of tool.
It comes with a built-in bypass that prevents over-pumping and a safety valve that eliminates the risk of overloading the jack by accident. All I’m saying is that it’s nice to feel safe when you’re underneath the car.
The fact that it weighs 85 pounds is probably enough to give you a pretty good idea of how heavy-duty the fast-lift service jack is. The jack’s trolley design includes both front and rear casters for an added element of mobility, though.
It’s not ideal, and it’s still insanely heavy – but it’s doable. Also, I would’ve preferred a handle that stands straight up for more convenient storage, but these are minor inconveniences.
- Heavy-duty steel construction
- Front and back castors added for mobility
- Lifting range from 5.5 to 22 inches
- Built-in protection against accidental over-pumping and overloading
- Fast-lift technology reduces user fatigue
- 7000-pound lifting capacity
- Very heavy
- The handle doesn’t stand vertically for storage
|I called this one a beast – and I stand by it! It’s super heavy, bulky, and has a load capacity of 7000 pounds; and I’m yet to find a vehicle that it cannot lift!|
ABN’s relatively new in the aftermarket auto accessory industry, but they’re dedicated to delivering an above-average experience at affordable prices. One example of this brand’s offerings is the ABN three-ton electric hydraulic jack that can be a handy tool for emergency roadside repairs.
It’s used to lift most types of cars, SUVs, trucks, and vans – and with a maximum lift capacity of three tons, or 6000 pounds and a 17.5-inch lift range, this should be done with ease, too. At the same time, it’s surprisingly lightweight and portable, since it weighs no more than 7.9 pounds.
The thing is, this is an electric hydraulic jack, which means that it gets the job done with minimal intervention on your part. It plugs into a 12-Volt power outlet, comes with an 11.5-foot power cord for ultimate flexibility, and has two easy-to-use switches – one for the vertical lift, and one for the LED light.
On that note, I was glad to see that it incorporates an LED light in its design, which can be extremely helpful for emergency repairs out on the road, where the conditions might not be ideal.
One thing that bothered me is that it’s relatively noisy compared to other models I’ve tested.
- Electric hydraulic lift with a three-ton capacity
- Includes an LED light
- The self-locking power structure and safety valve serve as fail-proof features
- Extremely lightweight at only 7.9 pounds
- Connects to a 12-Volt power outlet with an 11.5-foot cord
- Very easy to operate and user-friendly
- Needs an extension cord for the rear area of a pickup truck
- Can be noisy
|The ABN Electric Hydraulic Jack is a perfect fit for emergency road repairs with its three-ton capacity, a versatile 12-Volt power cord, user-friendly operation, and a handy built-in LED light.|
See more floor jack here
Frequently Asked Questions of Customer when looking for a best floor jack for lifted truck
1. How to jack up the front of a lifted truck?
Whether you’re lifting the front or rear end of your lifted truck, specific rules always apply – finding the right spot, chocking the wheels, and identifying a secure jacking point.
For a more specific scenario, like lifting the front of a lifted truck, you should choose a jacking point that’s halfway between the wheels or just behind the appropriate wheel. Some vehicles have dedicated jacking points, but if not, position the jack under the sub-frame, precisely between the front wheels.
2. What kind of jack do you use for a lifted truck?
Choosing the right kind of jack for a lifted truck is vital – but it doesn’t have to be complicated. A lifted truck will, on average, be at least three inches taller than a standard pickup, and quite massive, too. So, in essence, you need to check the structural integrity, maximum load capacity, and the lift range of the jack to ensure that it can “handle” your vehicle – and that’s pretty much it.
3. How high will a floor jack lift?
The maximum lifting range of the floor jack is quite an essential factor, especially when you’re lifting an off-road vehicle or an SUV. The thing is, SUVs are generally taller than your standard economy car, which automatically means that you’ll need a floor jack with a high enough lift range to get your vehicle up in the air.
A maximum height range of 16 to 20 inches should be high enough to lift your car – and most models on my list have that same range – but perform one final check before your purchase.
4. Will a 3-ton jack lift a truck?
A three-ton jack should be more than enough to lift almost any passenger car or truck, because, even in the worst-case scenario, it will likely support roughly 60 to 70 percent of the truck’s total weight.
For example, if your truck weighs approximately 7000 pounds, you’re still looking at around 5000 pounds that you need to lift – something that even a 2.5-ton floor jack can theoretically lift, let alone a three-ton one. So, numbers-wise, you should be fine.
5. Where is the best place to jack up a truck?
Learning to jack up and support your car correctly can make all the difference in the actual repair, as well as your safety. It’s important to remember that various vehicles have different support points; you should always start by referring to the owner’s manual to find a secure jack point in the specific area of your car that you want to lift.
The best point to jack up a truck would be an area that’s specifically designed for it, or a position that you know can support the vehicle’s full weight safely, without slipping off the floor jack.
Conclusion when you want to buy a floor jack for lifted truck
The best floor jack for lifted trucks will be the one with a high enough weight capacity to withstand your truck’s weight and can lift it high enough to accommodate the extra height of a lifted truck. Even more so, you’ll benefit from it being reliable, with a broad, stable base and safety features to protect you from potential accidents or even injury.
My opinion is that the Powerbuilt 620422E Heavy-Duty 4000 lb Triple Lift Jack offers a quality of construction, reliability, and safety – but any other model featured in my round-up is worth considering, too.
I am Dave McCurdy I am the content developer on the ecodrivingusa.com website. I have 3 years of experience in marketing.